3200series_gallery

Pompa Submersible Franklin

3200 Series Submersible Pumps
4" Reduced Diameter
The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The 3200 Series also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. For details on how to become a registered dealer and receive a 5-year warranty, contact your local distributor.

Features

  • Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells.
  • Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures.
  • Improved hydraulic performance for deeper set depths at all horsepower and flow ratings.
  • Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor.
  • Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance.
  • Acetal impeller provides high performance to increase pressure output while reducing system losses from friction.
  • Removable spring-loaded check valve.
  • Stainless steel pump intake screen and stainless steel cable guard.
  • Maximum water temperature: 120 °F / 49 °C.
  • Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.

Thermoplastic Pumps

GPM HP Stages Volts 2-Wire 3-Wire
Model Order No. Model Order No. Control Box
5 0.5 13 115 5FR05P4-2W115 96210505 5FR05P4-3W115 96210530 2801044915
0.5 13 230 5FR05P4-2W230 96210510 5FR05P4-3W230 96210535 2801054915
0.75 18 5FR07P4-2W230 96210515 5FR07P4-3W230 96210540 2801074915
1 22 5FR1P4-2W230 96210520 5FR1P4-3W230 96210545 2801084915
7 0.5 10 115 7FR05P4-2W115 96210705 7FR05P4-3W115 96210730 2801044915
0.5 10 230 7FR05P4-2W230 96210710 7FR05P4-3W230 96210735 2801054915
0.75 13 7FR07P4-2W230 96210715 7FR07P4-3W230 96210740 2801074915
1 18 7FR1P4-2W230 96210720 7FR1P4-3W230 96210745 2801084915
10 0.5 11 115 10FRD05P4-2W115 96211005 10FRD05P4-3W115 96211030 2801044915
0.5 11 230 10FRD05P4-2W230 96211010 10FRD05P4-3W230 96211035 2801054915
0.75 14 10FRD07P4-2W230 96211015 10FRD07P4-3W230 96211040 2801074915
1 19 10FRD1P4-2W230 96211020 10FRD1P4-3W230 96211045 2801084915

Stainless Steel Pumps

GPM HP Stages Volts 2-Wire 3-Wire
Model Order No. Model Order No. Control Box
5 0.5 13 115 5FR05S4-2W115 96310505 5FR05S4-3W115 96310530 2801044915
0.5 13 230 5FR05S4-2W230 96310510 5FR05S4-3W230 96310535 2801054915
0.75 18 5FR07S4-2W230 96310515 5FR07S4-3W230 96310540 2801074915
1 22 5FR1S4-2W230 96310520 5FR1S4-3W230 96310545 2801084915
1.5 30 5FR15S4-2W230 96310525 5FR15S4-3W230 96310550 2823008610
7 0.5 10 115 7FR05S4-2W115 96310705 7FR05S4-3W115 96310730 2801044915
0.5 10 230 7FR05S4-2W230 96310710 7FR05S4-3W230 96310735 2801054915
0.75 13 7FR07S4-2W230 96310715 7FR07S4-3W230 96310740 2801074915
1 18 7FR1S4-2W230 96310720 7FR1S4-3W230 96310745 2801084915
1.5 23 7FR15S4-2W230 96310725 7FR15S4-3W230 96310750 2823008610
10 0.5 11 115 10FRD05S4-2W115 96311005 10FRD05S4-3W115 96311030 2801044915
0.5 11 230 10FRD05S4-2W230 96311010 10FRD05S4-3W230 96311035 2801054915
0.75 14 10FRD07S4-2W230 96311015 10FRD07S4-3W230 96311040 2801074915
1 19 10FRD1S4-2W230 96311020 10FRD1S4-3W230 96311045 2801084915
1.5 24 10FRD15S4-2W230 96311025 10FRD15S4-3W230 96311050 2823008610

Thermoplastic Pump Ends

GPM HP Stages Model Order No.
5 0.5 13 5JR05P4-PE 96240500
0.75 18 5JR07P4-PE 96240501
1 22 5JR1P4-PE 96240502
7 0.5 10 7FR05P4-PE 96220700
0.75 13 7FR07P4-PE 96220701
1 18 7FR1P4-PE 96220702
10 0.5 11 10JRD05S4-PE 96241000
0.75 14 10JRD07S4-PE 96241001
1 19 10JRD1S4-PE 96241002
  • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models

Stainless Steel Pump Ends

GPM HP Stages Model Order No.
5 0.5 13 5JR05S4-PE 96320500
0.75 18 5JR07S4-PE 96320501
1 22 5JR1S4-PE 96320502
1.5 30 5JR15S4-PE 96320503
2 38 5JR2S4-PE 96320504
7 0.5 10 7JR05S4-PE 96320700
0.75 13 7JR07S4-PE 96320701
1 18 7JR1S4-PE 96320702
1.5 23 7JR15S4-PE 96320703
2 30 7JR2S4-PE 96320704
3 38 7JR3S4-PE 96320705
10 0.5 11 10JRD05P4-PE 96321000
0.75 14 10JRD07P4-PE 96321001
1 19 10JRD1P4-PE 96321002
1.5 24 10JRD15P4-PE 96321003
  • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models
  • Stainless steel pump intake screen and stainless steel cable guard.
  • Maximum water temperature: 120 °F / 49 °C.
  • Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.
622_sr_series_gallery94cb

Pompa Submersible Franklin

6-Inch SR Submersible Turbine Pumps

Stainless steel submersible pumps
Designed for industrial and agricultural applications, the SR Series submersible pump utilizes high grade stainless steel materials for the most demanding applications.

Performance

  • 5”: Heads of up to 120 m and flow rates up to 42 m³/h
  • 6”: Heads of up to 290 m and flow rates up to 132 m³/h
  • 8”: Heads of up to 270 m and flow rates up to 290 m³/h
  • 10”: Heads of up to 170 m and flow rates up to 420 m³/h.

Applications

  • Residential
  • Commercial
  • Agricultural
  • Mining
  • Marine
  • Municipal
  • Industrial
  • River water extraction
  • DWAF

Features

  • All fasteners are AISI 304 stainless steel for high quality connection points and easy assembly or dis-assembly
  • Shaft material – AISI 420 stainless steel for cast iron and AISI 304 stainless steel for bronze pumps
  • Bearing bushes made from rubber/steel and securely located by press fit
  • Wear rings made from rubber/steel
  • Unique high flow pumps on 6” and 8” models
  • Coupling manufactured from AISI 304 stainless steel
  • Coupling secured by key and grub-screw
  • Unique motor adaptor design with improved flow path to protect the motor mechanical seal,
  • shaft end and coupling from high velocity particulates.
6in_high_capacity_pump_gallery94cb

6-Inch 4400 Submersible Radial Pumps

Stainless Steel Submersible Pumps

Ideal for farm, home, irrigation, industry, municipal, and commercial applications, equipped with the power, performance and reliability you expect from Franklin Electric.

Performance

  • Flow rates of up to 5.5 m³/h.

Features

  • Heavy-duty stainless steel discharge head and motor bracket.
  • Stainless steel shaft, shell, intake screen and cable shield for corrosion resistance and longer life.
  • Stainless steel wear ring and Urethane floating eye seal for improved performance and efficiency.
  • Glass-filled Nylon impeller stage assemblies provide incredible strength and durability.

 

  • Ceramic shaft sleeve and rubber discharge bearing minimizes bearing wear and shaft misalignment without affecting pump efficiency.
  • 3″ NPT tapping in heavy-duty stainless steel discharge head.
    Fastener kit supplied for both 4″ and 6″ motors enabling 5-10 hp units to be mounted to either a 4″ or 6″ submersible motor.
  • Maximum Operating Temperature: 120°F/49°C

Applications

  • Residential
  • Commercial
  • Agricultural
  • Mining
  • Marine
  • Municipal
  • Industrial
  • River water extraction
  • DWAF
4_inch_high-capacity_gallery94cb

Pompa 4-Inch High Capacity Submersible

4-Inch High Capacity Submersible Pumps

Franklin Electric’s high capacity submersible pumps utilise high grade stainless steel materials for the most demanding applications. Engineered for commercial, irrigation and residential use. Design advancements reduce efficiency losses caused by internal pump leakage and abrasives (sand).

Performance

  • Flow rates of up to 24 m³/h.

Features

  • Stainless steel impellers and diffusers
  • Heavy duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than strap designs
  • Teflon® floating wear ring, ceramic bearing journal and Nitrile rubber fluted bearing ensure durability against wear for long-lasting performance and reliability
  • Suited to operate in horizontal position
  • Built-in check valve to protect the pump against water hammer
  • Energy-efficient hydraulic design for cost-effective operation
  • Space-saving compact design
  • Easy to install and dismantle for service in the field if necessary

Applications

  • Residential
  • Commercial
  • Agricultural
  • Mining
  • Marine
  • Municipal
  • Industrial
  • River water extraction
  • DWAF
tri-seal_pumps_gallery94cb

Pompa Tri Seal Submersible

Tri-Seal Submersible Pumps

The standard FPS 4400 4-inch submersible pump features the new TRI-SEAL floating stage system. This new stage system improves efficiency and protects against wear when pumping abrasives (sand). For details on how to become a registered dealer and receive a 5-year warranty, contact your local distributor.

Performance

  • Flow rates of up to 7 m³/h.

Feature

  • 300 series stainless steel hub floats with the impeller maintaining a positive seal.
  • Phenolic washer provides down-thrust protection.
  • Acetal impeller provides high efficiency performance and abrasion resistance.
  • Modified PPO diffuser and disc – proven abrasion resistant material.
  • Floating stage design allows impeller to float independently.
  • Removable, spring-loaded check valve.
  • Maximum water temperature: 120 °F/ 49 °C.
  • Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear.
  • Powered by Franklin Electric corrosion resistant 4-inch submersible motor
  • Patented impeller hub seal system seals radially and axially to prevent fluid recirculation, providing high performance in the harshest conditions.

Applications

  • Residential
  • Commercial
  • Agricultural
  • Marine
  • Municipal
  • Industrial
  • River water extraction
  • DWAF